جميع المنتجات
  • HUATEC GROUP CORPORATION
    بوب
    Astm E114-15 بوصة نوع 1018 معايرة اختبار كتلة الكربون الصلب ميني Iiw 2
  • HUATEC GROUP CORPORATION
    وليام
    Astm E114-15 بوصة نوع 1018 معايرة اختبار كتلة الكربون الصلب ميني Iiw 2
  • HUATEC GROUP CORPORATION
    توم
    Astm E114-15 بوصة نوع 1018 معايرة اختبار كتلة الكربون الصلب ميني Iiw 2
  • HUATEC GROUP CORPORATION
    ليو
    Astm E114-15 بوصة نوع 1018 معايرة اختبار كتلة الكربون الصلب ميني Iiw 2
اتصل شخص : Noah
رقم الهاتف : +8613911115555
واتس اب : +8613910983110

Highly sophisticated inductance sensor Surface Roughness Tester SRT6210 with 10mm LCD

  • Highly sophisticated inductance sensor Surface Roughness Tester SRT6210 with 10mm LCD
  • Highly sophisticated inductance sensor Surface Roughness Tester SRT6210 with 10mm LCD
  • Highly sophisticated inductance sensor Surface Roughness Tester SRT6210 with 10mm LCD
  • Highly sophisticated inductance sensor Surface Roughness Tester SRT6210 with 10mm LCD
  • Highly sophisticated inductance sensor Surface Roughness Tester SRT6210 with 10mm LCD
  • Highly sophisticated inductance sensor Surface Roughness Tester SRT6210 with 10mm LCD
  • Highly sophisticated inductance sensor Surface Roughness Tester SRT6210 with 10mm LCD
  • Highly sophisticated inductance sensor Surface Roughness Tester SRT6210 with 10mm LCD
مكان المنشأ بكين
اسم العلامة التجارية HUATEC
إصدار الشهادات ISO, CE, GOST
رقم الموديل اس ار تي 6210
الحد الأدنى لكمية قطعة واحدة
الأسعار 600-800USD
تفاصيل التغليف حزمة التصدير القياسية
وقت التسليم 1-4 أيام
شروط الدفع بـ (ت) ، (باي بال) ، (ويسترن يونيون)
القدرة على العرض 500 قطعة في الشهر

اتصل بي للحصول على عينات مجانية وكوبونات

واتس اب:0086 18588475571

(وي تشات): 0086 18588475571

سكايب: sales10@aixton.com

إذا كان لديك أي مخاوف، نحن نقدم المساعدة على الانترنت على مدار 24 ساعة.

x
تفاصيل المنتج
إبراز

surface finish tester,surface roughness meter

,

surface roughness meter
اترك رسالة
منتوج وصف
Digital Surface Roughness Tester SRT6210
Key words:portable roughness tester, roughness ra, surface roughness, surface finish, roughness tester mitutoyo, roughness testing machine, surface finish tester, surface roughness tester manufacture, roughness testing machine manufacture
 
Features:
Surface roughness tester SRT6210 is compatible with four standards of site to measure surface roughness of various machinery-processed parts, calculate corresponding and clearly display all measurement parameters. When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism by the sharp built-in probe. This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier.
The exclusive DSP processes and calculates and then outputs the measurement results on LCD.
* Multiple parameter measurement: Ra, Rz, Rq, Rt
* Highly sophisticated inductance sensor
* Four wave filtering methods : RC, PC-RC, GAUSS and D-P
* Built-in lithium ion rechargeable battery and control circuit with high capacity
* Small in size, light in weight and easy to use
* Can communicate with PC computer for statistics, printing and analyzing by the optional cable and the software for RS232C interface.
*Manual or automatic shut down. The tester can be switched off  by pressing  the Power key at any time. On the other hand, the tester will power itself off about 5 minutes after the last  key operation.
*The tester can memorize 7 groups of measurement results and measuring conditions for later use or download to PC.
*Metric /Imperial Conversion

 
Specifications:
Display: 4 digits, 10 mm LCD, with blue backlight
Parameters:  Ra, Rz, Rq, Rt
Measuring Range
           Ra, Rq:  0.005-16.00um/0.020-629.9uinch
           Rz, Rt:   0.020-160.0um/0.078-6299uinch
Accuracy: Not more than 10%
Fluctuation of display value: Not more than 6%
Sensor :
         Test Principle: Inductance type
         Radius of Probe Pin: 5µm
         Material of Probe Pin: Diamond
         Dynamo-measurement of Probe: 4mN(0.4gf)
         Probe Angle: 90º
         Vertical Radius of Guiding Head: 48mm
Maximum driving stroke:  17.5mm/0.7inch
Cutoff length (l): 0.25mm / 0.8mm / 2.5mm  optional
Evaluation length:  1-5L
Driving speed:
         sampling length = 0.25mm  Vt=0.135mm/s
         sampling length = 0.8mm    Vt=0.5mm/s
         sampling length = 2.5mm    Vt=1mm/s
         returning                             Vt=1mm/s
Profile digital filter
         Filtered Profile:            RC
         Filtered Profile:            PC-RC
         Filtered Profile:            Gauss
         Non-Filtered Profile:    D-P
Resolution :                           
Evaluation length :      5 cut-off
Power Li-ion battery:   rechargeable
Operating conditions:  Temp. 0~50℃
                                    Humidity <80%
Size:                          140x57x48 mm  (5.5x2.2x1.9 inch)    

Weight:                       about 420 g

Standard Delivery of surface roughness tester SRT6210:
Main Unit                       1
Carrying Case               1
Standard Sensor           1
Standard Sample Plate  1
Power Adapter              1
Operation Manual          1
Screwdriver                    1
Adjustable Leg               1
Sensor Protector            1

Optional Accessories of surface roughness tester SRT6210:
Cable and Software for RS-232
Extension Rod
Measurement Support
Special pick-up for grooves, bores and holes

بطاقة:

اختبار الانتهاء من السطح,مقياس خشونة السطح

surface finish tester,surface roughness meter