Laboratory And On Site Portable Shaker Vibration Calibrator Handheld

Laboratory And On Site Portable Handheld Shaker For Vibration Calibration Of Vibration Meters Handheld

The parameters and units of HG5026 Vibration Calibrator are defined as following:

Acceleration (m/s² ): PEAK

Velocity (mm/s ): RMS

Displacement (μm): PK- PK

HUATEC HG5026 vibration calibrator can be used to calibrate vibration accelerometer, velocity and proximity transducer and also a vibration measuring instrument.

Standard sine signal vibration at any frequency from 1 to 1280 Hz can be defined in the calibrator.

The amplitude of the acceleration, velocity and displacement, can be defined through potentiometers and shown on digital displays.

Either horizontal or vertical vibration can be generated.

HUATEC HG5026 combines sine signal generator, power amplifier, standard transducer, vibration meter and a shaker in one and features a small volume, high accuracy and easy operation.

HUATEC HG5026 can be used either in laboratory or on site.

Keypad introduction

1 Vibration amplitude display

Showing the amplitude of the vibration

2 Calibration potentiometer Designed for calibrating this calibrator by comparing the reading of an accurate vibration meter and the display of this device. Put function selecting switch to ACC, then use a screwdriver to adjust the display to make it the same as that accurate vibration meter. Then adjust VEL & DISP the same way.

3 Parameter selecting switch Select display parameter of the calibrator

4 Adjusting the vibration amplitude

5 Adjusting the vibration amplitude slowly

6 The vibration head for fixing a transducer to be calibrated

7 The tapped hole for fixing the stand of proximity probe

For the calibration of proximity probe.

8 Power switch

9 Socket for 220 V AC power input cable

10. Socket for vibration output

For monitoring the wave shape/ distortion of the vibration

11 Output socket of –24 V voltage

Providing power – 24Vdc for calibration of proximity probe.

12 Frequency adjustment

Press for selecting the digital position, Rotate to change value

13 Vibration frequency display

Specifications

Frequency: from 1 to 1280 Hz,adjustable

Amplitude accuracy:

Acceleration (@10m/s² pk) 40Hz to 320Hz + 0.3dB + 1digit

20Hz to 640Hz + 0.5dB +1digit

Velocity (@20mm/sec rms) 40Hz to 320Hz +0.5dB +1digit

Displacement (@50μm pk-pk) 40Hz to 320Hz + 0.5dB + 1digit

Proximity probe linearity calibration kits

Probe: 5mm and 8mm probes Range: 0~2.0mm

Display: 3 ¹/₂ digit display for vibration and frequency

Size: 300 x250 x210(mm)

Weight: 6kgs

Temperature: Operation: 0^oC to 50 ^oC

Storage: -20 ^oC to 70 ^oC

Humidity: 90% non -condensing

Maximum vibration amplitude & transducer weight

Note: With higher frequency the value of the displacement of vibration is very small so there will be no vibration signal output from the calibrator.

We also offer vibration calibration system for more high accuracy as below photo: