|
| الاسم التجاري: | HUATEC |
| رقم الموديل: | PH-1S |
| موك: | 1 قطعة |
| تفاصيل التغليف: | حزمة التصدير القياسية |
| شروط الدفع: | T/T ، Paypal ، Western Union |
Portable and Acurate Superficial Rockwell Hardness Tester PH-1S, Multifunction Portable Hardness Tester
Introduction
Tests the superficial hardness of metals.
The test principle and accuracy comply to standard ISO6508.
With the bench stand it can be used on the desk as well as on site.
Tests the hardness of thin plate, slim pipe, thin shaft, small ball and small stampings, workpieces with small supporting surface as well as parts requiring small indentation, replacing Vickers hardness tester.
It is used for finished workpiece NDT test directly.The small indentation is on-destructive to most workpieces.
Traceable standard hardness block.
Indenter inspected with standard Rockwell hardness tester.
Test force calibrated with load cells directly traceable to national
secondary benchmark.
Main Technical Parameters
Initial Test Force: 3kg
Total Test Force: 15kg, 30kg, 45kg
Force Applying Method: By screw
Indenter: 120°diamond cone
Ф1.588mm carbide ball
Accuracy: Meets the requirements of ISO6508
Resolution: 0.5HR
Testing Range: HRN, HRT,HRW, HRX, HRY, etc. 15 scales.
Application: All metals including iron, steel copper, aluminium, zinc, lead, tin, carburized steel, nitrided steel etc.
Standard Package
Tester
Bench stand
120°diamond cone indenter
Ф1.588mm carbide ball indenter
3 superficial Rockwell test blocks
V anvil (small)
Extension (small)
Base for standard test block (magnetic)
Carrying case
Optional Accessories
120°diamond cone indenter
Ф1.588mm, Ф3.175mm carbide ball indenter
Ф1.588mm, Ф6.35mm, Ф12.7mm steel ball indenter
Standard test blocks (HR15N, HR30N,HR45N, HR15T, HR30T,
HR45T)
Raised spot anvil
Slim raised spot anvil (flat top: Ф1.5mm, Ф2.5mm, Ф3.5mm)
Diamond raised spot anvil
Ball testing anvil
Spare magnifier
فيديو
فيديو
فيديو
فيديو
فيديو
التصنيف العام
لقطة التصنيف
التالي هو توزيع جميع التقييماتجميع المراجعات