-
كاشف الخلل بالموجات فوق الصوتية
-
مقياس سمك بالموجات فوق الصوتية
-
مقياس سماكة الطلاء
-
اختبار صلابة المحمولة
-
كاشف عيوب الأشعة السينية
-
أجهزة الزحف في أنابيب الأشعة السينية
-
كاشف العطلات
-
اختبار الجسيمات المغناطيسية
-
معدات اختبار التيار إيدي
-
اختبار الاختراق
-
مقياس الطول على الشاطئ
-
اختبار صلابة برينيل
-
اختبار صلابة روكويل
-
اختبار صلابة مايكرو فيكرز
-
اختبار صلابة المواد
-
مقياس الاهتزاز
-
اختبار خشونة السطح
-
العرض الشخصي
-
مقاييس اللمعان
-
مطرقة اختبار الخرسانة
-
مقياس الحرارة بالأشعة تحت الحمراء بالليزر
-
بوبAstm E114-15 بوصة نوع 1018 معايرة اختبار كتلة الكربون الصلب ميني Iiw 2
-
وليامAstm E114-15 بوصة نوع 1018 معايرة اختبار كتلة الكربون الصلب ميني Iiw 2
-
تومAstm E114-15 بوصة نوع 1018 معايرة اختبار كتلة الكربون الصلب ميني Iiw 2
-
ليوAstm E114-15 بوصة نوع 1018 معايرة اختبار كتلة الكربون الصلب ميني Iiw 2
Particle Size Analysis Magnetic Particle Testing Equipment EN ISO 9934-2

اتصل بي للحصول على عينات مجانية وكوبونات
واتس اب:0086 18588475571
(وي تشات): 0086 18588475571
سكايب: sales10@aixton.com
إذا كان لديك أي مخاوف، نحن نقدم المساعدة على الانترنت على مدار 24 ساعة.
xالمعيار | EN ISO 9934-2 | القوة | إلكتروني |
---|---|---|---|
استخدام | معدات الاختبار المغناطيسية | طلب | تصنيف توزيع حجم الجسيمات |
الضمان | 12 شهراً | الوظيفة | تحليل حجم الجسيمات |
إبراز | mt test specimen,magnetic strenght meter,magnetic strenght meter |
MTU test block magnetic particle detector magnaflux magnetic particle test equipment
Instructions
Reference Block Type 1 (MTU Nr.3)
Description:
The reference block type 1 is a residually magnetized metal disc, where, caused by a special treatment, a network of coarse and fine cracks had been generated. The magnetic field of the reference block generates stray fluxes of different strength across these cracks. More sensitive
inspection media result in a more distinct indications as compared to the indications when lower
sensitivity is used. The central bore hole is made for easier handling.
Use:
The reference block type 1 according to EN ISO 9934-2 (former description "MTU test block") isused for checking and supervision of the indication sensitivity of magnetic particle crack detection agents. The surface of the residually magnetized reference block contains a network of coarse and fine cracks. After dipping or spraying with the magnetic particle solution, the crack indications are
evaluated.
Application:
The reference block type 1 is immersed or carefully sprayed with the well-mixed inspection medium.Redundant inspection medium should be drained off. Then the crack indications are to be viewed under appropriate lighting conditions. You should then inspect the weaker indications as this is where differences in particle sensitivity becomes obvious.
Note:
The crack indication of the reference block type 1 may be affected by contamination, strong magnetic fields, or mechanical influences. To give correct indications, the reference block should be free of dirt, oil, grease and magnetic particles from former applications. Therefore, the reference
block should be cleaned after each application (wipe off with a wet cloth). The reference block should not be exposed to strong magnetic fields such as from MP crack detectors, magnetizing and demagnetizing coils, magnetic holding plates, etc. as they may influence the residual field of the block by altering the field strength and direction.